How to replace Replace ECM/PCM with Honda HDS Him?

When the ECM/PCM is replaced, it is necessary to be recognized a code each other to the ECM/PCM and the Immobilizer Control Unit-Receiver with the Honda HDS. Also, the vehicle with Keyless Access System needs to be recognized a code each other to the ECM/PCM and Keyless Access Control Unit. Otherwise, the engine cannot be started.

How to replace Replace ECM/PCM with Honda HDS Him?

1.System Selection Menu, click [IMMOBI]

2.Click [Replace ECM/PCM]

3.Press tick to continue

Obtain PCM-code from MaRIS2/GENPO/Distributor

4.Input PCM-code and Press tick to continue

5.Turn the ignition switch off
6.Turn the ignition switch on

7.Turn the ignition switch off.

The registration of immobilizer codes into the Immobilizer unit has been completed.

8．Press tick to continue
Check all keys to ensure each will start the engine

9.Click [NO]

Is this vehicle equipped with a KEYLESS ACCESS Remote System?

10.The registration is complete.Press tick to continue

Steps on how to install v3.015.020 honda hds software

Newest V3.015.020 Honda HDS HIM diagnostic tool is affordable and powerful diagnostic tool for Honda vechiels from 1992-2014.11 year.

1.What you need to pay attention of Honda HDS V3.015.020 installation

• 1.Operate system: XP
• 2.This V3.015.020 needs activation,please send "Hardware ID" to us.
• 3.Honda HDS communications port must be set to (COM1)

2.Steps on how to install Honda HDS V3.015.020

1.Open the folder "HDS PC",start "setup.exe".

2.Next,Destination Selection,Country selection,choose the one depend on your car information.

3.Dealer NO: 208342

4.Select language you install.

5.Firmwall Helper APP,click "Don’t Send"

6.Right click the "USA-Dealer.reg" in the CD,then click merge,then "Yes".

7.Start "HIM-GNA.exe"

8.Please send us"Hardware ID" to get the activation code.Inpur user name:1234,and activation code,then click "register".

9.>>OK>>Finsish.

10.Open the folder "ECURewrite-GNA+HIM",then click "Setup.exe",choose language.Next click finish.

11.Check Computer management>>Device manager,please confirm the "communications port" must be set to (COM1)