How to Memorize Honda 08 TPMS sensor ID with Honda HIM HDS

Newest V3.015.020 Honda HDS HIM diagnostic tool is affordable and powerful diagnostic tool for Honda vechiels from 1992-2014.11 year.When you replace the TPMS control unit, replace the tire pressure sensor, or substitute a good wheel with tire pressure sensor, you need to get the all 4 tire pressure sensor IDs memorized.Honda HDS HIM is a good choice for it.

How to Memorize Honda 08 TPMS sensor ID with Honda HIM HDS
NOTE:
Let the vehicle sit for at least 5 munities to allow the tire pressure sensors to switch to sleep mode.
The vehicle with the new tire sensor must be at least 10 ft (3m) away from other vehicles that have sensors.
Connect the Honda diagnostic system with vehicle via OBD port on the driver’s side under the dashboard
Turn ignition ON
Make sure HDS Honda is well communicate with TPMS control module

Enter vehicle information in HDS program


Select "Honda Systems" from Mode selection menu

Select "TPMS" control module

Select "Sensor ID Learning" from the Mode menu

The Honda HDS software will display Tire pressure sensor ID, follow the screen prompt to turn on the TPMS Trigger Tool.

Hold the TPMS tool (A) near the valve stem of one wheel, and memorize the tire pressure sensor ID by following the screen prompts on the HDS.

If you turn the ignition OFF before memorizing all four sensor IDs, the memorizing sensor ID will be canceled.

Write down the 4 tire pressure sensor IDs.

Exit the Honda HDS software and disconnect Honda HIM tool.

Steps on how to install v3.015.020 honda hds software

Newest V3.015.020 Honda HDS HIM diagnostic tool is affordable and powerful diagnostic tool for Honda vechiels from 1992-2014.11 year.

1.What you need to pay attention of Honda HDS V3.015.020 installation

• 1.Operate system: XP
• 2.This V3.015.020 needs activation,please send "Hardware ID" to us.
• 3.Honda HDS communications port must be set to (COM1)

2.Steps on how to install Honda HDS V3.015.020

1.Open the folder "HDS PC",start "setup.exe".

2.Next,Destination Selection,Country selection,choose the one depend on your car information.

3.Dealer NO: 208342

4.Select language you install.

5.Firmwall Helper APP,click "Don’t Send"

6.Right click the "USA-Dealer.reg" in the CD,then click merge,then "Yes".

7.Start "HIM-GNA.exe"

8.Please send us"Hardware ID" to get the activation code.Inpur user name:1234,and activation code,then click "register".

9.>>OK>>Finsish.

10.Open the folder "ECURewrite-GNA+HIM",then click "Setup.exe",choose language.Next click finish.

11.Check Computer management>>Device manager,please confirm the "communications port" must be set to (COM1)