How to replace Replace ECM/PCM with Honda HDS Him?

When the ECM/PCM is replaced, it is necessary to be recognized a code each other to the ECM/PCM and the Immobilizer Control Unit-Receiver with the Honda HDS. Also, the vehicle with Keyless Access System needs to be recognized a code each other to the ECM/PCM and Keyless Access Control Unit. Otherwise, the engine cannot be started.

How to replace Replace ECM/PCM with Honda HDS Him?

1.System Selection Menu, click [IMMOBI]

2.Click [Replace ECM/PCM]

3.Press tick to continue

Obtain PCM-code from MaRIS2/GENPO/Distributor

4.Input PCM-code and Press tick to continue

5.Turn the ignition switch off
6.Turn the ignition switch on

7.Turn the ignition switch off.

The registration of immobilizer codes into the Immobilizer unit has been completed.

8．Press tick to continue
Check all keys to ensure each will start the engine

9.Click [NO]

Is this vehicle equipped with a KEYLESS ACCESS Remote System?

10.The registration is complete.Press tick to continue