VBOX-VOLVO XC90 Diagnostic Tool Operate Guide

VOLVO XC90 is using DoIP communication diagnostic mode, the old VOLVO VTDA DICE detection hardware has been unable to provide diagnostic services. Our VBOX-VOLVO is the newest which can replace VOLVO DICE over domestic and international.

How to use VBOX- Volvo:

1. Connect to hardware, insert the box into OBD interface, connect the box with internet reticle and computer reticle interface, red light sparkling. You can find the OBD interface on the left side down of the seat.

LED status	Status instruction
Red light sparkling	hardware working ok
Green light sparkling	data communication status

2. UDVOLVO is a free install application, decompression zip package to local computer folder, run the application…/Volvo/ASAMMCD3/UDVolvo.exe press enter after you find your vehicle IP.

3. Press“Vehicle identification number, read ECU information, read fault number

4. Double press “current fault code number”, enter single ECU
Press“current fault code number or history fault code number”, press the right button on mouse go check for detail information.

5. Check the detail information.

6. Check the fault code number detail information.

7. Check ECU detail information.

8. Enter ECU read fault code number history fault code number, clean up code number, read vehicle identification number and ECU detail information, press current “current fault code number and history fault code number” to clean up the fault code numbers.

Hardware lights instruction