How to update Autel AutoLink AL619 ABS/SRS Scanner?

Autel AutoLink AL619 ABS/SRS OBDII CAN Diagnostic Tool,it can diagnoses ABS/SRS system codes on most 1996 and newer major vehicle models.

How to update Autel AutoLink AL619 Scanner?

Register the Tool:
Please log in our website to register an Autel ID. Then log in our website with your Autel ID and password to register your tool. http://pro.auteltech.com/

When registering the tool on our website, please make sure that the serial number and register password that you input are correct.On the tool itself, you can press on Setup->About to double check the serial number and register password. If you only have the S/N, please contact our technical support to check out the register password.

Update via Computer:
1. Log in our website with your Autel ID and password, and then
download the latest PC Suite for your tool from your account.
http://pro.auteltech.com/

2. Then please install the PC suite software on a Windows computer that can get Internet access.
3. Load the SD card to the computer via a card reader, run the update client software, and then input your Autel ID and password to log in our system.
4. Then wait for the Update window to display. If you forget your password unintentionally, you may always click the [Forget Password?] to link to our website and find your password back.

5. You can use the pull-down menu on the right to select an SD card if two or more SD cards have been connected to the PC. And you can click on the Install buttons to download the software updates.
To ensure the good performance of the scan tool, it is recommended to download and install all the software updates.

6. After downloading all the software, please insert the SD card back to the tool; then you can enjoy the new software.

Autel AutoLink AL519 Scanner Overview

Autel AutoLink AL519 OBDII EOBD & CAN Scan Tool 

Autel AutoLink AL519 advantage:

1.AutoLink AL519 Support all 10 modes of OBDII test for a complete diagnosis.
2.Works on ALL 1996 and newer vehicles (OBDII & CAN) – domestic and import.
3.Autel AutoLink scanner,one year free update online.
4.Autel AutoLink AL519 featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, it is the best partner for your car repairing.
5. Easily determines the cause of the Check Engine Light(MIL)
6. Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
7. Multilingual menu and DTC definitions – English, Spanish and French, etc.

Autel AutoLink AL519 Function:

1. Turns off Check Engine Light (MIL), clears codes and resets monitors
2. Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification
3. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
4. Internet updateable and upgradeable
5. Prints data via PC
6. Retrieves vehicle information (VIN, CIN and CVN)
7.Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time

How to check Vehicle History by AUTEL MaxiSYS Pro MS908P

The MaxiSYS Pro has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis.AUTEL MaxiSYS Pro MS908P support with WIFI,English, Spanish, French, German, Portuguese, Polish, Italian and Swedish language available.

Vehicle History
This function stores records of test vehicle history, including vehicle
information and the retrieved DTCs from previous diagnostic sessions, and
displays all information in an easy-to-check table list, on which you can view
summarized details and manually input other information about the test
vehicle and diagnostic loggings, etc. The Vehicle History also provides direct
access to the previously tested vehicle and allows you to restart a diagnostic

session without the need to do vehicle identification again.

1.  Top Toolbar Buttons – navigates and makes various controls of the

application.
2.  Main Section – displays all the vehicle history records information.
To activate a test session for the recorded vehicle
1.  Tap the Shop Manager application on the MaxiSys Job Menu.
2.  Select Vehicle History
3.  Tap the Diagnostics button at the bottom of the thumbnail of a
vehicle record item. Or,
4.  Select a vehicle record item by tapping the thumbnail.
5.  A Historical Test record sheet displays, check the recorded
information of the recorded test vehicle, and tap the Diagnostics
button on the upper right corner.
6.  The vehicle’s Diagnostics screen displays, now a new diagnostic
session is activated, see 4.6 Diagnosis for detailed

instructions on vehicle diagnostic operations.

Difference about Original Autel MaxiDiag Elite Scanner

1.Autel Maxidiag scanner Features:

1.Reads and clears trouble codes on engine, transmission , airbag, and ABS failures

2.Supports all 10 test modes of the latest J1979 OBD II test specs.

3.Enhanced OBD II Mode 6

4.OBD II code tips guide technicians to the root cause of trouble codes faster

5.Data graphing

6.View freeze frame data

7.USB cable included for product updates

8.Prints data via PC-link

MaxiDiag Elite Scanner Comparison

Item No.	MD704  HKSC132	MD702 HKSC130	MD701 HKSC129	MD701 HKSC125	MD703 HKSC127	MD704 HKSC128	MD702 HKSC126	MD802 TKSC124-D	MD802  HKSC124-B
Language	Multi-languages (German/ French/ Spanish/ Dutch/Polish/ Portuguese/ Italian)	Same Multi-Language	Same Multi-Language	English Only	Same Multi-Language	Same Multi-Language	Same Multi-Language	English Only	English Only
Support System	4 System (PCM/RCM/ TCM/VDM)	4 System (PCM/RCM/ TCM/VDM)	4 System (PCM/RCM/ TCM/VDM)	For All System	For All System	For All System	For All System	For All System+DS Model	For 4 Systems +DS model
Support Vehicles	Global OBD I & OBD II coverage (US, Asian, & European)	European Vehicles	Asia Vehicles (Especailly for Japan Cars)	Asia Vehicles	USA(GM, Ford, and Chrysler) Vehcles	Europen Vehciles (Peugeot, Citroen, Renault, Dacia, Fiat, Alfa-Romeo, Abarth)	Europen Vehicles	Include MD701, MD702, MD703, MD704 vehicles	European, Asian, and Domestic vehicles
Support Protocol	OBD II/OBD I	OBD II	OBD II	OBD II	OBD II	OBD II	OBD II	OBD II	OBD II
Features of Maxidiag	1.With the optional OBD-I adapter set, the MaxiDiag can diagnose older vehicles. 2.Reads and clears trouble codes on engine, transmission , airbag, and ABS failures 3.Supports all 10 test modes of the latest J1979 OBD II test specs, including Read Codes,Erase codes, Live Data, Freeze Frame, I/M Readiness, O2 Monitor Test, On-Board Monitor Test, Component Test, and  Vehicle Information 4.Enhanced OBD II Mode 6 5.OBD II code tips guide technicians to the root cause of trouble codes faster 6.Data graphing 7.View freeze frame data 8.USB cable included for product updates 9.Prints data via PC-link

How to install Autel MaxiFlash Pro J2534 ECU Programming Tool?

Autel MaxiFlash Pro J2534 ECU Programming Device,it is reliable, fast performance, and flexibleUsing the OEM software, this premier tool is capable of providing dealer-level programming capabilities for all makes, all models at an affordable price. Support Toyota, Volvo, Honda, Jaguar and BMW.

Install Device Driver
In order to make the MaxiFlash Pro operate correctly with the re-flashing and diagnostic applications in the target PC, you will first install the MaxiFlash Pro J2534 Pass-thru device driver onto PC that will control the device.

1)Insert the software driver CD to your computer. The driver installation wizard will load automatically.
2)Click on Next to welcome to the program main page
3)Select Next on the installation location and installation name. It is recommended not to change the default settings. Otherwise the computer may have a hard time recognizing the driver
4)Click Install and the driver program will be installed on your PC

Note: During this time, a MS-DOS style window will pop out and may remain on your screen for a short while. It is normal, do not attempt close the MS-DOS style program as it will prevent the driver from being installed completely. It will be closed automatically when the driver is successfully installed.

Install MaxiFlash Pro software
5)Connect the MaxiFlash Pro programming tool with PC using USB cable. A “Found New Hardware Wizard” window will display
6)Select [Install the software automatically (Recommended)], click on Next and windows will search for the driver software automatically.
7)Select ]MaxiFlash Pro] program and click on Install.
8)When the MaxiFlash pro device driver is successfully installed, you will be able to see the [MaxiFlash Pro] entry in the Device Manager under [Maixi Pass Thru Serial]

NOTE:

If the driver installation is not complete or unsuccessful, or the PC still can’t recognize the device, an Error or Question mark will display beside the entry icon. Please try installing the driver program again by clicking the entry, then select start auto searching for the software, or manually locate the specific file that contains the driver program.

9)      Ethernet Connection. Using wired network between the Pass-Thru device and the PC, users can choose either way of connection described as below:

Connecting to a PC Directly

1. Connect the PC to the Pass-Thru device with the supplied Ethernet cable.
2. Open “My Network Places” Properties.
3. In the Properties window, under the LAN or High-Speed Internet heading, right click on the “Local Area Connection” and select “Properties”.
4. Now a new window should pop up, titled “Local Area Connection Properties”. Here you need to select the Internet Protocol (TCP/IP) option, and then click on the “Properties” button

Again a new window titled “Internet Protocol (TCP/IP) Properties” will pop up. In this window, you need to select “Use the following IP Address” radio button, and set the specific IP address (take the value shown in picture below example), then click on “OK”.

NOTE: For specific IP address information please contact your network administrator.

After all the above properties settings have been properly set, users can continue on completing the network configuring procedure, please refer to the detailed operation guidance in

MaxiFlash Configuration – Wired Network.

Connecting to an Existing LAN

1. Connect the Pass-Thru device to a local network with the supplied Ethernet Cable.

2. On most LANs, Autel MaxiFlash Pro can obtain its IP address automatically using DHCP.

MaxiFlash Configuration – Wired Network

1) Connect the Pass-Thru device to the PC or an existing LAN with the supplied Ethernet cable.

2) Power up the device by the external power supply; verify the green Power status light on the front panel is on.

3) Verify the Ethernet status light is on.

4) Click on “All Programs” from Windows Start Menu, find the “MaxiFlash Pro” entry under “Autel”, click on “MaxiFlashCFG”, and wait for the program interface to pop up.

5) Select the “Settings” tab to set up the network configuration.

6) Select “DHCP”, if you are connecting to the local area network, the MaxiFlash Pro will obtain the IP address automatically. Select “Manual”, if you are connecting to the PC directly for the first time, and then set the IP address on your own.

7) Click on the “Apply” button to save the network configuration

Autel MaxiDiag Elite MD802 and Autel DS708 Comparison

Features and Functions
	Autel MaxiDiag Elite MD802	Autel Maxidas DS708
Reads and clears codes in all available modules for all 1996+ Europen, American and Asian vehicles	√	√
Deep vehicle system coverage for all available Electronic Systems	√	√
Supports all 5 OBDII protocols and all 10 test models	√	√
Crystal clear TFT color screen	√	√
USB internet updateable and upgradeable	√	√
Graphs, records and play back OBDII live Data	√	√
Shows vehicle ID’s and Cal. ID’S and VIN	√	√
Bi-Lingual customer service M-F, 6AM – 6PM, PST	√	√
Limited One (1) year warranty	√	√
Bi-directional coverage for all available modules		√
Coding and Modules set ups		√
Immobilizer and key coding functions		√
Component activation testing		√
Captures, saves and prints screenshots for convenient troubleshooting		√
Remote display and Control for convenient demonstration and training		√
Display live data in text, graph and analog for easy data review		√
Wi-fi Capability for updates and printing		√
Internet explorer brings on-line resources of your choice		√
Data logging allows quick and accurate technical support		√
O.E style menus and function		√
Large 7 inch 800*800 Pixel TFT crystal clear color display		√

Original Autel MaxiDas DS708 Component Descriptions

MaxiDAS DS708 is a state-of-art diagnostic system that delivers more accurate, more stable, more comprehensive, easier and faster diagnosis. The new generation platform stands out in a variety of tools by providing incredibly high performance with intuitive operation. Right for the first time, workshops and technicians could find an OE-level diagnostic solution designed for the aftermarket. The DS708 is the key to gain customer confidence and boost your bottom-line.

Autel Maxidas DS708 Specification:

MaxiDas DS708 Component Descriptions:

Autel MaxiVideo MV208 And Autel MV400 Comparison

Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight. MV400 can be used to record digital still images and MPEG2 or MPEG1 videos either on its internal flash memory.

Autel MaxiVideo MV208 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight. It can record digital still images and MPEG2 or MPEG1 videos either on its internal flash memory.

Comparison of Autel MaxiVideo MV208 And Autel MV400:

How to register the tool of Autel MaxiDiag Elite MD802?

Autel MaxiDiag Elite MD802 full system with data stream, it support online update and one year warranty. It is designed for technicians to troubleshoot all the systems for most of major vehicles on the road today.

Register the Tool
User would update the scan tool ONLY after you had registered thetool on our website:http://pro.auteltech.com/.Then you could download software, update online, retrieve information and get warranty service. 

• 1.Log on the website:http://pro.auteltech.com/
• 2.Click on the Update tool bar at the top of the screen, and then select User Register.Or,Click on the Updates column in the lower right corner of the screen, and select Register.
• 3.The screen of Register Information appears. Please read through the instructions, and click on Agree to continue.
• 4.Put in the Product Serial No. and Register Password, and click onNext.
• 5.Follow the instructions on screen to finish the registration.

Original Autel Autolink Code Readers Comparison

Original Autel Autolink Code Scanner includes serveral different ones,such as Autel AL301,Autel Al609.etc.But how about their difference?How to choose Autel Autolink scanner?

Here is the pic to shows their difference:

Autel AutoLink AL519 OBDII EOBD & CAN Scan Tool Instruction

Autel AutoLink AL519 OBDII EOBD & CAN Scan Tool Support Online Update

1) OBD II CONNECTOR – Connects the scan tool to the vehicle's Data Link Connector (DLC).
2) LCD DISPLAY – Indicates test results.
3)GREEN LED – Indicates that engine systems are running normally (The number of monitors on the vehicle which are active and performing their diagnostic testing is in the allowed limit, and no DTCs are present).
4)YELLOW LED – Indicates there is a possible problem. A "Pending" DTC is present and/or some of the vehicle's emission monitors have not run their diagnostic testing.
5)RED LED – Indicates there is a problem in one or more of the vehicle's systems. The red LED is also used to show that DTCs are present. DTCs are shown on the Scan Tool's display. In this case, the MIL lamp on the vehicle's instrument panel will light steady on.
6)One-Click I/M Readiness Key – Quick-checks State Emissions readiness and drive cycle verification.
7)ESC BUTTON – Cancels a selection (or action) from amenu or returns to the previous screen.
8)LEFT SCROLL BUTTON – When look up DTC definitions, moves to previous character and views additional information on previous screens if DTC definition covers more than one screen; deselect all marked PID data when viewing or recording customized live data list; views previous frames of recorded data when playing back live data. It is also used to update DTC library when pressed.
9)HELP BUTTON – Provides help information and Code Breaker function.
10)UP SCROLL BUTTON – Moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up through the current screen to the previous screens for additional data.
11)OK BUTTON – Confirms a selection (or action) from a menu.
12)RIGHT SCROLL BUTTON – When look up DTC definitions, moves to next character and view additional information on next screens if DTC definition covers more thanone screen; selects/deselects PID data when viewing or recording customized live data list, and views next frames of data when playing back live data.
13)DOWN SCROLL BUTTON – Moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves down through the current screen to next screens for additional data.
14) USB CONNECTOR – Connects the scan tool to the PC for printing and upgrading.