IKEYCUTTER XC-007 Condor Key Cutting Clamp Cutter Installation

IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine is powerful and easy to use with most advanced software and precised mechanism.


IKEYCUTTER XC-007 Cutter installation steps: 

1 Put the cutter into the jacket.

2 Press and hold “Spindle lock button”.

3 Turn clockwise “Cutter installation knob”, “Spindle lock button” will take

advantage into the positioning hole on spindle; continue turn clockwise until

XC-007 Cutter release steps: 

1 Press and hold “Spindle lock button”, turn counterclockwise “Cutter

installation knob” to loosen cutter.

2 Hold the cutter when loosen it to prevent fallen damage to cutter.

3 If the cutter chuck tightly, pat down “Cutter installation knob” gently.

XC-007 Clamp installation steps: 

1 Turn counterclockwise “Locking wrench” to loosen.

2 Pull out “Locating pin pull handle”.

3 Push the clamp from the right side of the clamp base, choose corresponding anchor

point according to the key type.

4 Turn counterclockwise “Locking wrench” to tighten clamp.

the cutter tightens.

Clamp base wiring